prikaz prve stranice dokumenta Karakterizacija plastične anizotropije lima legure CuFe2P
  Download
PDF 4.19 MB
master's thesis
Karakterizacija plastične anizotropije lima legure CuFe2P
2021. urn:nbn:hr:179:785095
Ljubić, Lea
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Cite this document

Ljubić, L. (2021). Karakterizacija plastične anizotropije lima legure CuFe2P (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:785095

Ljubić, Lea. "Karakterizacija plastične anizotropije lima legure CuFe2P." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:785095

Ljubić, Lea. "Karakterizacija plastične anizotropije lima legure CuFe2P." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:785095

Ljubić, L. (2021). 'Karakterizacija plastične anizotropije lima legure CuFe2P', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 11 February 2025, https://urn.nsk.hr/urn:nbn:hr:179:785095

Ljubić L. Karakterizacija plastične anizotropije lima legure CuFe2P [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2025 February 11] Available at: https://urn.nsk.hr/urn:nbn:hr:179:785095

L. Ljubić, "Karakterizacija plastične anizotropije lima legure CuFe2P", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:785095

Please login to the repository to save this object to your list.
Metadata
TitleKarakterizacija plastične anizotropije lima legure CuFe2P
Title (english)Characterization of plastic anisotropy of sheet alloy CuFe2P
AuthorLea Ljubić
MentorVedrana Cvitanić (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2021-03-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu obrađeni su rezultati pokusa jednoosnog rastezanja uzoraka lima legure CuFe2P različitih orijentacija u odnosu na pravac valjanja. Iz ovih rezultata za svaki ispitivani uzorak određene su elastične karakteristike: Youngov modul elastičnosti i Poissonov koeficijent te plastične karakteristike: granica tečenja, zakon očvršćavanja, vlačna čvrstoća i Lankfordov koeficijent. Lankfordov koeficijent razmatran je kao konstantna i kao inkrementalna veličina prema standardnoj metodi. Lankfordov koeficijent računat je i kao trenutna veličina prema nestandardnom postupku na temelju aproksimacije eksperimentalne krivulje stvarna plastična deformacija širine - stvarna plastična deformacija duljine odgovarajućom polinomnom funkcijom. Rezultati pokusa rastezanja dovedeni su u vezu s rezultatima dobivenima u pokusu cilindričnog dubokog vučenja istog materijala. Na temelju ovog razmatranja za svaku su ispitanu orijentaciju određeni reprezentativni uzorci i pripadne reprezentativne vrijednosti razmatranih elastičnih i plastičnih karakteristika. Analizirana je i promjena orijentacijskih ovisnosti naprezanja tečenja i Lankfordovog koeficijenta s napredovanjem plastične deformacije.
Abstract (english)
In this paper, the experimental data obtained in the uniaxial tensile tests of copper alloy CuFe2P sheet specimens with different orientations with respect to the rolling direction are processed. Based on the experimental data, elastic characteristics: Young's modulus and Poisson's ratio and plastic characteristics: yield stress, hardening law, tensile strength and Lankford coefficient were determined for each tested specimen. Lankford coefficient was considered as a constant and as an incremental value according to standards. Lankford coefficient was also calculated as an instantaneous value according to a non-standard approach based on non-linear polynomial fit of the experimental transverse versus longitudinal true plastic strain curves. The results obtained in the tensile tests were correlated to the results obtained in the cylindrical cup deep drawing tests of the same material. Based on this consideration, representative samples and corresponding representative values of the considered elastic and plastic characteristics were determined for each tested orientation. The evolution of yield stress and Lankford coefficient directional dependences with ongoing plastic deformation was also analyzed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:785095
Study programmeTitle: Mechanical Engineering; specializations in: Structures and Energy Technology, Computer Aided Design and Engineering, Production Mechanical Engineering
Course: Structures and Energy Technology
Study programme type: university
Study level: graduate
Academic / professional title: Magistar/magistra inženjer/inženjerka strojarstva (Magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2024-03-06
Terms of useLicence In copyright icon
Created on2021-11-23 13:47:28