prikaz prve stranice dokumenta Simulacija kutnog kanalnog istiskivanja
Access restricted to authenticated users
undergraduate thesis
Simulacija kutnog kanalnog istiskivanja
2022. urn:nbn:hr:179:341919
Ević, Joze
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering Technology

Cite this document

Ević, J. (2022). Simulacija kutnog kanalnog istiskivanja (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:341919

Ević, Joze. "Simulacija kutnog kanalnog istiskivanja." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:341919

Ević, Joze. "Simulacija kutnog kanalnog istiskivanja." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:341919

Ević, J. (2022). 'Simulacija kutnog kanalnog istiskivanja', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 11 July 2024, https://urn.nsk.hr/urn:nbn:hr:179:341919

Ević J. Simulacija kutnog kanalnog istiskivanja [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2022 [cited 2024 July 11] Available at: https://urn.nsk.hr/urn:nbn:hr:179:341919

J. Ević, "Simulacija kutnog kanalnog istiskivanja", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:179:341919

Please login to the repository to save this object to your list.
Metadata
TitleSimulacija kutnog kanalnog istiskivanja
Title (english)Simulation of equal channel angular pressing
AuthorJoze Ević
MentorBranimir Lela https://orcid.org/0000-0001-5197-0224 (mentor)
MentorJure Krolo https://orcid.org/0000-0002-3204-0344 (komentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering Technology)
Split
Defense date and country2022-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu najprije je opisan razvoj intenzivne plastične deformacije (SPD). Objašnjene su najčešće metode koje se koriste postupkom SPD, sa naglaskom na kutno kanalno istiskivanje (ECAP). Opisan je princip ECAP-a sa svim najvažnijim parametrima kao što su: način izvođenja, kut između ulaznog i izlaznog kanala, brzina žiga i radna temperature. Pomoću softvera QForm napravljene su simulacije na aluminijskoj leguri EN AW 6082. Simulacije su odrađene za rute A, BA, BC i C. Pomoću metode konačnih elemenata u QFormu dobivene su deformacija u uzdužnom presjeku i poprečnim presjecima. Zaključeno je kako su, gledajući čitav sirovac, rute A i BA najhomogenije te ih je najbolje koristiti ako je potreban čitav sirovac, a rute C i BC su bolje ako je potreban homogeniji dio materijala.
Abstract (english)
In this final paper, development of severe plastic deformation (SPD) was firstly described. Most common methods using SPD are explained, with emphasis on equal channel angular pressing. The principle of ECAP process is described with all the most important parameters such as: execution method, angle between input and output channels, plunger speed and operating temperatures. Using QForm software, simulations were made on aluminium alloy EN AW 6082. Simulations were performed for routes A, BA, BC and C. Using the finite element method in QForm, deformations in the longitudinal section and cross sections were obtained. It was concluded that, looking at the whole raw material, routes A and BA are the most homogeneous and are best used if the entire raw material is needed, and routes C and BC are better if a more homogeneous part of material is needed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:341919
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2023-05-04 10:31:14