prikaz prve stranice dokumenta Simulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow
Access restricted to authenticated users
master's thesis
Simulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow
2023. urn:nbn:hr:179:047101
Barišić, Niko
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Barišić, N. (2023). Simulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:047101

Barišić, Niko. "Simulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:179:047101

Barišić, Niko. "Simulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:179:047101

Barišić, N. (2023). 'Simulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 21 February 2025, https://urn.nsk.hr/urn:nbn:hr:179:047101

Barišić N. Simulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2023 [cited 2025 February 21] Available at: https://urn.nsk.hr/urn:nbn:hr:179:047101

N. Barišić, "Simulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:179:047101

Please login to the repository to save this object to your list.
Metadata
TitleSimulacija injekcijskog prešanja blatobrana automobila pomoću softvera Moldflow
Title (english)Simulation of injection molding of car fender using Moldflow software
AuthorNiko Barišić
MentorBranimir Lela (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Split
Defense date and country2023-02-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu se analizirao i rješavao problem pojave linija spajanja na blatobranu automobila Dacia Logan X52 koji rezultira estetski neprihvatljivim izgledom aspektnog dijela površine proizvoda. U prvom dijelu rada su se obradili polimeri kao materijali koji su sve zastupljeniji u automobilskoj industriji. U drugom dijelu rada se obradila tehnologija injekcijskog prešanja te su objašnjeni dijelovi procesa proizvodnje s naglaskom na dizajn kalupa kao najvažnijeg dijela procesa. Treći dio rada se bavi dizajnom proizvoda tj. tijekom razvoja proizvoda, ali i prijedlozima za poštovanje određenih pravila prilikom konstrukcije proizvoda. Četvrti dio rada je fokusiran na detaljan prikaz kalupa za brizganje kao i cjelokupni proces njegovog dizajna sa svim pripadajućim sustavima. Peti dio rada opisuje softver Autodesk Moldflow Insight i njegovu upotrebu. U šestom poglavlju su navedeni rezultati prethodnih pokušaja, a u posljednjem dijelu rada su prikazane simulacije koje su provedene u svrhu ovog rada tj. eliminacije problema linija spajanja.
Abstract (english)
In this master thesis, the problem of the appearance of weld lines on the fender of the Dacia Logan X52 car, which results in an aesthetically unacceptable appearance of the aspect part of the product's surface, was analyzed and solved. In the first part of the paper, polymers were processed as materials that are increasingly prevalent in the automotive industry. In the second part of the paper, the technology of injection molding was processed and parts of the production process were explained with an emphasis on mold design as the most important part of the process. The third part of the paper deals with product design, i.e. during product development, but also with suggestions for compliance with certain rules during product construction. The fourth part of the work is focused on a detailed presentation of the injection mold as well as the entire process of its design with all associated systems. The fifth part of the paper describes Autodesk Moldflow Insight software and its use. In the sixth chapter, the results of the previous attempts are listed, and in the last part of the work, the simulations that were carried out for the purpose of this work, ie the elimination of the problem of weld lines, are presented.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:047101
Study programmeTitle: Mechanical Engineering; specializations in: Structures and Energy Technology, Computer Aided Design and Engineering, Production Mechanical Engineering
Course: Structures and Energy Technology
Study programme type: university
Study level: graduate
Academic / professional title: Magistar/magistra inženjer/inženjerka strojarstva (Magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2024-10-23 12:12:15