prikaz prve stranice dokumenta Visokotlačno lijevanje - razrada tehnološkog procesa
Access restricted to authenticated users
undergraduate thesis
Visokotlačno lijevanje - razrada tehnološkog procesa
2022. urn:nbn:hr:179:793389
Peraić, Andrea
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering Technology

Cite this document

Peraić, A. (2022). Visokotlačno lijevanje - razrada tehnološkog procesa (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:793389

Peraić, Andrea. "Visokotlačno lijevanje - razrada tehnološkog procesa." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:793389

Peraić, Andrea. "Visokotlačno lijevanje - razrada tehnološkog procesa." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:793389

Peraić, A. (2022). 'Visokotlačno lijevanje - razrada tehnološkog procesa', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 25 April 2024, https://urn.nsk.hr/urn:nbn:hr:179:793389

Peraić A. Visokotlačno lijevanje - razrada tehnološkog procesa [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2022 [cited 2024 April 25] Available at: https://urn.nsk.hr/urn:nbn:hr:179:793389

A. Peraić, "Visokotlačno lijevanje - razrada tehnološkog procesa", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:179:793389

Please login to the repository to save this object to your list.
Metadata
TitleVisokotlačno lijevanje - razrada tehnološkog procesa
Title (english)High pressure casting - development of the technological process
AuthorAndrea Peraić
MentorSonja Jozić https://orcid.org/0000-0002-7570-5799 (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering Technology)
Split
Defense date and country2022-07-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu opisan je postupak visokotlačnog lijevanja u svim fazama nastajanja aluminijevog odljevka. Uvodni dio je vezan općenito za ljevarstvo kako bi se što bolje mogao razumjeti ostatak rada koji je vezan za visokotlačno lijevanje. Detaljno je opisan postupak pripreme aluminijevih legura čije su oznake prema DINu: 226, 231 i 239. U cijelom postupku pripreme najbitnije je prilagođavanje temperature prilikom transporta slitine iz ljevaonice prema centru obrade, kako ne bi došlo do naglog skrućivanja aluminijeve slitine prilikom ulijevanja u kalup (alat). Pri završetku procesa se provjeravaju poroznost i napetost koja su najbitnije u cijelom procesu visokotlačnog lijevanja. Drugi dio rada vezan je za proračun dijelova kalupa za visokotlačno lijevanje. Iako su u radu navedene aluminijeve legure prema DIN-u, za potrebe proračuna koristila se legura A383.
Abstract (english)
This final work describes the process of high-pressure die casting in all stages of aluminum casting. The introductory part is related to foundry in general in order to better understand the rest of the work related to high-pressure casting. The process of preparing aluminum alloys whose markings according to DIN are: 226, 231 and 239 is described in detail. In the entire preparation process, the most important thing is to adjust the temperature during the transport of the alloy from the foundry to the processing center, so that there is no sudden solidification of the aluminum alloy during pouring into mold (tool). At the end of the process, porosity and tension are checked, which is the most important part of the entire high-pressure casting process. The second part of the work is related to the calculation of mold parts for high-pressure casting. Although aluminum alloys according to DIN are listed in the paper, for the purposes of calculations, the alloy A383 has been used.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:793389
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: Stručni/Stručna prvostupnik/prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva (Stručni/Stručna prvostupnik/prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2023-06-13 12:42:42