prikaz prve stranice dokumenta Analiza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora
Access restricted to authenticated users
master's thesis
Analiza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora
2021. urn:nbn:hr:179:985836
Gabelica, Ante
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Cite this document

Gabelica, A. (2021). Analiza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:985836

Gabelica, Ante. "Analiza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:985836

Gabelica, Ante. "Analiza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:985836

Gabelica, A. (2021). 'Analiza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 30 December 2024, https://urn.nsk.hr/urn:nbn:hr:179:985836

Gabelica A. Analiza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2024 December 30] Available at: https://urn.nsk.hr/urn:nbn:hr:179:985836

A. Gabelica, "Analiza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:985836

Please login to the repository to save this object to your list.
Metadata
TitleAnaliza varijanti rotora Savonius tipa vjetroturbine i radni tok za optimizaciju 2D oblika rotora
AuthorAnte Gabelica
MentorIvo Marinić-Kragić https://orcid.org/0000-0002-9680-6193 (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2021-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Izvršena je simulacija strujanja zraka kroz Savonius turbinu pomoću „Ansys Fluent“ CFD rješavača. Simulacija je napravljena za tri geometrije od kojih je jedna, s polukružnim lopaticama, u cijelosti geometrijski definirana. Druge dvije su spline i spline-scooplet krivulje koje su prvo parametrizirane, zatim u nastavku optimirane, tako da daju najveću učinkovitost vjetroturbine. Zbog konstantnog poprečnog presjeka turbine, korišteno je pojednostavljenje geometrije, te je provedena 2D analiza strujanja. Optimizacija se vršila u optimizacijskom programskom alatu ModeFRONTIER.
Abstract (english)
The "Ansys Fluent" CFD solver simulated the flow of air through the Savonius turbine. The simulation was made for three geometries. One of the geometries, with semicircular blades, is entirely geometrically defined. The other two are the spline and spline-scooplet curves that was first parameterized, then optimized below to give the best wind turbine efficiency. Due to the constant cross-section of the turbine, a simplification of the geometry was used and a 2D flow analysis was performed. Optimization was performed in the optimization software tool ModeFRONTIER.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:985836
Study programmeTitle: Mechanical Engineering; specializations in: Structures and Energy Technology, Computer Aided Design and Engineering, Production Mechanical Engineering
Course: Structures and Energy Technology
Study programme type: university
Study level: graduate
Academic / professional title: Magistar/magistra inženjer/inženjerka strojarstva (Magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2022-11-04 11:22:11