prikaz prve stranice dokumenta Projektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila
Access restricted to authenticated users
master's thesis
Projektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila
2021. urn:nbn:hr:179:891492
Babić, Marin
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering Technology

Cite this document

Babić, M. (2021). Projektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila (Master's thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:891492

Babić, Marin. "Projektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:891492

Babić, Marin. "Projektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:891492

Babić, M. (2021). 'Projektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 14 March 2023, https://urn.nsk.hr/urn:nbn:hr:179:891492

Babić M. Projektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2023 March 14] Available at: https://urn.nsk.hr/urn:nbn:hr:179:891492

M. Babić, "Projektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:891492

Please login to the repository to save this object to your list.
Metadata
TitleProjektiranje naprave za odsijecanje uljevnih kanala na bočnom braniku automobila
Title (english)Designing of device for cutting outlet channels on the car side bumper
AuthorMarin Babić
MentorBoženko Bilić (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering Technology)
Split
Defense date and country2021-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U diplomskom radu projektirana je naprava za odsijecanje uljeva injekcijskog prešanja kao moguće poboljšano rješenje postojeće naprave koja trenutno obavlja navedeni zadatak. U drugom poglavlju opisan je proizvod za koji se dizajnira naprava za odsijecanje uljeva. U trećem poglavlju rada teorijski su obrađeni polimerni materijali kao materijal proizvodnje bočnog branika. U četvrtom poglavlju detaljno je opisana tehnologija proizvodnje, injekcijsko prešanje. U petom poglavlju detaljno je opisano konstruiranje postojeće naprave za odsijecanje kanala, svi njeni sustavi, prednosti i mane, te su ponuđena neka moguća poboljšanja. U šestom poglavlju projektirana je nova varijanta naprave za odsijecanje uljevnih kanala, koja bi zadatak trebala obavljati učinkovitije, što je u sedmom poglavlju provjereno pomoću AHP metode višekriterijskog odlučivanja koja matematičkim putem po zadanim kriterijima kao rezultat daje najisplativiju alternativu za obavljanje zadatka.
Abstract (english)
In this Master’s Thesis desingning of device for cutting outlet channel system of the car side bumper was described, after the process of injection molding, and offered as the new improved option for the existing device which currently does the task. In the second chapter of the thesis the product which is the center part of the thesis is described. In the third chapter theoretical description of the used material (polymer) is described. In the fourth chapter the technology of production (injection molding) is described in detail. In the fifth chapter of the thesis the current device which does the task is thoroughly described. On the grounds of it, the new and improved device was modeled and described in the sixth chapter which should do the task more efficiently. Thesis is ending with the seventh chapter whereby the multi-criteria analysis AHP, conducted on the mathematical grounds based on the set criteria, two of the set alternatives of the devices are graded and the most optimal alternative is given.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:891492
Study programmeTitle: Industrial Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka industrijskog inženjerstva (magistar/magistra inženjer/inženjerka industrijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Public noteRad izrađen u suradnji s AD PLASTIK d.d.
Created on2022-10-19 12:27:47